For Sale Complete Lincoln 325A MIG setup, used, 100% tested and components cleaned or painted.
This is an industrial MIG setup, not a hobby or DIY MIG. This is a 3-phase unit, make sure you have 3 phase power.
The power supply was part of a shop buyout of all their old welding equipment. It was dirty and scratched up but otherwise worked perfectly.
Lincoln Electric IdealArc R3S-325, Built in 1983 by serial #
325A at 100% duty cycle.
Supports Arc, MIG and TIG welding (TIG will require external unit for HF start.)
LN-7 "Squirt" Wire Feeder
Some minor rust on case, scratches.
Tweco #2 MIG gun, 12 foot lead.
Includes 0.030-0.035 liner, 5/8" shroud, new O-rings.
Used, but 100% functional
Also available is a Tweco #4 15 foot MIG gun with new 0.030-0.035 liner.
Tweco guns are standard and have easy consumable parts availability
Brand new WeldIt (Lincoln Electric) regulator for Argon and Argon/CO2 mixes. 2" Guages, Pressure guage calibrated in LPM and CF/Hr. 3000 PSI input gauge.
Never used, removed from package for pictures. Includes 6' hose/fittings
|Included||Condition||Average Ebay Prices|
|R3S-325||Used, 100% tested||$750-$1,100|
|LN-7 Wire Feeder||Used, 100% tested||$500-$1,000|
|Tweco #2 MIG Gun, 12'||Used, restored||$75-$100|
|Weldit Regulator||Brand New||$50-$65|
|25' #2/0 power lead to Wire Feeer||Used, good condition||$40|
|25' control cable for Wire Feeder||Used, good condition||$25|
|30' #2/0 Ground Lead with 400A clamp||Used, good condition||$40|
|Dolly for R3S with wheels and tree to hang cables||Used, good condition||$75|
|7' #6 power cable (no plug), 16' cable available||Used, Good condition||$40|
|Adobe PDF Manuals for R3S and LN-7||N/A||Free download|
Using lowest Ebay Prices, the value is $1,595.00 plus shipping (normally $400-$670) New, this sold for for over $3,500
Sale Price: $750.00 Firm. Low price for quick sale.
Only thing needed is Gas/wire and safety equipment.
Delivery: Entire setup can be delivered on a pallet via my trailer to the Atlanta area. You will need a fork lift or hoist to unload. I can help with the connections. you will need to provide a power connector or disconnect panel.
The system has been tested extensively. There is no guarantee, but I will help if any problems arise.
|Here is the original condition of the welder when received. It was fully functional but was filthy and had lots of scratches.|