Here is the MIG wire feed unit. Half the front panel is busted off and the cover is missing. Amazingly it still works. Only supports 0.035 and 0.045 wire with the roller that comes with it. Have a buddy who does machining; I'll have him make an 0.030 roller.

I have a new front panel made with amperage control. Just need to cut a new top cover and then paint.

 

 Have everything working, On the left are steel and aluminum TIG welds. Both about 1/8".

These are my first TIG welds. They came out very well. I havd done some more with mixed results. Will need some practice.

 

On to Page 4

Back to Page 1 - On to Page 4

Back to Welding Main page